No products in the cart.
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8”
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8″ is designed for the most common tubing diameters in HVAC, and it’s recommended to both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
£120.30Testo 552i Smart Probe Vacuum Gauge
Testo 552i Smart Probe Vacuum Gauge allows simple measurement of system evacuation via a single service port. The testo 552i automatically connects to the testo 550s and 557s digitam manifolds and can also be used in conjunction with the 550i via the smart app.
£150.10Testo 557s Smart Vacuum Kit with Hoses
Testo 557s Smart Vacuum Kit with Hoses – For completely wireless measurements on refrigeration and air conditioning systems and heat pumps. Thanks to the Bluetooth vacuum probe included, you can even measure vacuum without any cables or hoses. You will get the testo 557s smart digital manifold with Bluetooth and 4-way valve block, one testo 552i wireless vacuum probe (Bluetooth), two testo 115i wireless clamp thermometers (Bluetooth, NTC), a hose filling set with 4 hoses and a robust transport case.
£493.63GCT-004 Grab Clip for Threaded Rod – 5/8″ & 1-1/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£21.49GCT-003 Grab Clip for Threaded Rod – 1/2″ & 7/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£20.38GCT-002 Grab Clip for Threaded Rod – 3/8″ & 5/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£19.46GCT-001 Grab Clip for Threaded Rod – 1/4″ & 1/2″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£18.36Cantilever Arm 450mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arms with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£31.00Condenser Mounting Bracket – 140kg
Professional finish by professional engineers. Designed to suit all brands of air conditioner, ACR brackets support outdoor condensing units mounted on exterior walls. Available in four sizes to mount units up to 140kg. All brackets are tested to twice the rated safe working loads.
£64.71BFT850D BlackMax Flaring Tool (7 Position) with Drill Feature
Lightweight R-410A Clutch-Type Eccentric Flaring Tool with Drill Feature
£212.77TR700E BlackMax Recovery machine 240v (CPS)
The BLACKMAX TR700 recovery machine is designed for servicing residential and commercial refrigeration systems, and is the industry’s best-looking and best-performing refrigerant recovery machine incorporating non-restrictive piston manifold valves, a powerful two cylinder oil-less reciprocating compressor and twin fans. The resulting system provides superior airflow and condensing, which maximises speed in both direct liquid and direct vapour recovery.
£1,171.66