No products in the cart.
A2L, A3 Left Hand Thread Cylinder Adaptor R32
R32 Left Hand Thread Cylinder Adaptor
£9.71Fan Blade 250mm Blow for Multifit Fan Motors
Fan Blade 250mm Blow for Multifit Fan Motors
£4.35Cushion Clamp – 1-1/8″ OD Tube (SF018) 10pk
Cushion Clamp – 1-1/8″ OD Tube (SF018) 10pk
£12.54Fan Assembly 300mm Single Phase 230v (Blow)
300mm Fan Assembly Single Phase 230v (Suction)
£94.93Fan Assembly 300mm Single Phase 230v (Suction)
300mm Fan Assembly Single Phase 230v (Suction)
£98.89Fan Blade 230mm Suction for Multifit Fan Motors
Fan Blade 230mm ideal for 10W Multifit/Universal Fan Motors
£4.58Braided Hose – Black – 1/4″ x 30m
Condensate Drain Hose
Reinforced pvc braided hose suitable for draining condensate from a/c and refrigeration units.
30-metre coils are shrink-wrapped for easy transportation and storage.
Black hose restricts light penetration, reducing the build-up of bacteria within the condensate drain.
£12.77NTC Probe 1.5m SIL 6 x 40mm -50°+120°C
NTC Probe 1.5m SIL 6 x 40mm -50°+120°C are used with temperature controls to monitor the cooling capacity of a refrigeration system.
£7.78Flare Nut Reducer 5/8 – 1/2 SAE Brass
Flare nut reducers 5/8 – 1/2 secure flared/tapered tube together to create a serviceable pressure resistant and leak tight fitting.
£2.76Fan Blade 300mm Blow for Multifit Fan Motors
Fan Blade 300mm Blow for Multifit Fan Motors
£6.40Fan Assembly 350mm Single Phase 230v (Suction) Trumaxx
350mm Fan Assembly Single Phase 230v (Suction) trumaxx
trumaxx series axial fan motors are external rotor fan motor with characteristics of compact structure , convenient installation, reliable operation, low noise, energy saving and high efficiency.
They are divided into single phase asynchronous capacitor fan motor and three phase asynchronous fan motor which are widely used in condensers, evaporators and other refrigeration equipment and ventilating cycle areas.
Each of the motor has a thermal protection in its winding.
Standard length of the electrical wire on the fan is 1.5m
£125.68Cantilever Arm 600mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arm with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£35.00