No products in the cart.
Created in 1979 and located in Essonne, 25 km south of Paris. Siccom is European manufacturer who’s engineering and network expands the globe.
When it started its activities, SICCOM specialized in level and proximity detection, bimetallic thermal protection and condensate removal pumps (evacuation pumps).
Braided Hose – Clear – 1/4″ x 30m
Condensate Drain Hose
Reinforced pvc braided hose suitable for draining condensate from a/c and refrigeration units.
30-metre coils are shrink-wrapped for easy transportation and storage.
Clear hose restricts light penetration, reducing the build-up of bacteria within the condensate drain.
£12.77Braided Hose – Clear – 1/2″ x 30m
Reinforced pvc braided hose suitable for draining condensate from a/c and refrigeration units.
30-metre coils are shrink-wrapped for easy transportation and storage.
Black hose restricts light penetration, reducing the build-up of bacteria within the condensate drain.
£17.75CABLE TIE MOUNT – MOUNT STUDDING (CTM-2)
Cable tie mounts with studding are made of virgin nylon 6.6 and are suitable for use with CTM-1
£7.56CABLE TIE MOUNT – SCREW FIXING (CTM1)
Designed specifically for holding heavier cable bundles these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fixing and can be used with a wide variety of heavy duty cable ties up to 8.3mm to be used with CTM-2.
£7.56Testo 552i Smart Probe Vacuum Gauge
Testo 552i Smart Probe Vacuum Gauge allows simple measurement of system evacuation via a single service port. The testo 552i automatically connects to the testo 550s and 557s digitam manifolds and can also be used in conjunction with the 550i via the smart app.
£150.10Testo 557s Smart Vacuum Kit with Hoses
Testo 557s Smart Vacuum Kit with Hoses – For completely wireless measurements on refrigeration and air conditioning systems and heat pumps. Thanks to the Bluetooth vacuum probe included, you can even measure vacuum without any cables or hoses. You will get the testo 557s smart digital manifold with Bluetooth and 4-way valve block, one testo 552i wireless vacuum probe (Bluetooth), two testo 115i wireless clamp thermometers (Bluetooth, NTC), a hose filling set with 4 hoses and a robust transport case.
£493.63Eliwell IDPlus 974 Thermostat Controller 230v (LF)
Thermostat Controller IDPlus Eliwell 974 230v (LF) Temperature setting and monitoring equipment for commercial and industrial plants For commercial and industrial refrigeration and air-conditioning units Electronic controllers for static, ventilated refrigerators and heated surfaces THERMOSTAT
£82.57GCT-004 Grab Clip for Threaded Rod – 5/8″ & 1-1/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£21.49GCT-003 Grab Clip for Threaded Rod – 1/2″ & 7/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£20.38GCT-002 Grab Clip for Threaded Rod – 3/8″ & 5/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£19.46GCT-001 Grab Clip for Threaded Rod – 1/4″ & 1/2″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£18.36Cantilever Arm 450mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arms with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£31.00