No products in the cart.
Nylog Blue HFC Gasket/Thread Sealant RT201B
Nylog Blue HFC Gasket/Thread Sealant RT201B
£12.29Copper (Soft) Tube 3/8″ (9.5mm) x 21G x 15M
Copper Coil (Soft) Tube 3/8″ x 21G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£54.68Copper (Soft) Tube 1/4″ (6.4mm) x 22G x 15M
Copper Coil (Soft) Tube 1/4″ x 22G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£31.03F-Gas Manual
F-Gas F-Gas 517/2014 Reference Manual: A comprehensive companion for successful achievement of the mandatory European wide F-Gas certificate Paperback
£65.40F-Gas Manual
£65.40Copper (Soft) Tube 3/4″ (19.04mm) x 22G x 15M
Copper Coil (Soft) Tube 3/4″ (19.04mm) x 22G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£102.74Copper (Soft) Tube 5/8″ (15.9mm) x 21G x 15M
Copper (Soft) Tube 5/8″ (15.9mm) x 21G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£104.66Copper (Soft) Tube 1/2″ (12.7mm) x 21G x 15M
Copper Coil (Soft) Tube 1/2″ x 21G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£74.04Copper (Soft) Tube 7/8″ (22.2mm) x 22G x 15M
Copper (Soft) Tube 7/8″ (22.2mm) x 22G x 15M is best suited for air conditioning, heat pump and refrigeration systems.
£125.45Channel Nut Short Spring Size: M8 PNS08ZP (25PK)
Channel Nut Short Spring Size: M8 PNS08ZP (25PK) Channel Nuts are manufactured with an indentation to fit tightly into strut channel and are used to secure threaded rod and other hardware to strut. Universally recognised and used across all industries including the installation of air condition and refrigeration capital equipment.
£5.51Brazing Mat Turbo 1300°C Y12
A soldering mat is a thermal blanket to isolate areas with from burning. A soldering mat is heat resistant up to 1250 degrees celsius, is flexible and is asbestos free.
£19.62Brazing Mat Turbo 1300°C Y12
£19.62F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads
F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads is designed for the most common tubing diameters in HVAC. The high temperature method preserves the copper’s/aluminium’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN Tools are developed and recommended for soft copper.
£93.43S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8”
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8″ is designed for the most common tubing diameters in HVAC, and it’s recommended to both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
£120.30