No products in the cart.
EFX20PK2 Earthfix Earthing Locking Nut M20 – 2 Pack
A single piece component solution to earthing. EarthFix has been designed with feedback from Electricians in industry to help improve installs. EarthFix will need no additional tools or components, everything is included in the pack as standard.
£7.00CABLE TIE MOUNT – MOUNT STUDDING (CTM-2)
Cable tie mounts with studding are made of virgin nylon 6.6 and are suitable for use with CTM-1
£7.56CABLE TIE MOUNT – SCREW FIXING (CTM1)
Designed specifically for holding heavier cable bundles these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fixing and can be used with a wide variety of heavy duty cable ties up to 8.3mm to be used with CTM-2.
£7.56Big Wipes 4×4 Multi Purpose Wipes – Black Lid (Yellow)
Big Wipes 4×4 Multi Purpose Wipes – Black Lid (Yellow) industrial-strength, antibacterial cleaning wipes are designed for use by people who need a very tough, highly tear resistant, very absorbent and immediate on-hand cleaning product. The cutting edge 3 layered power fabric captures liquid between the fibres, helping minimise the number of cleansing wipes used for any cleaning job.
£8.69F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads
F4000 Flaring Tool Set 4 Piece 1/4” 3/8” 1/2” 5/8” Heads is designed for the most common tubing diameters in HVAC. The high temperature method preserves the copper’s/aluminium’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN Tools are developed and recommended for soft copper.
£93.43S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8”
S6000 Swaging Tool Set 6 Piece 1/4”3/8”1/2”5/8”3/4”7/8″ is designed for the most common tubing diameters in HVAC, and it’s recommended to both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
£120.30GCT-004 Grab Clip for Threaded Rod – 5/8″ & 1-1/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£21.49GCT-003 Grab Clip for Threaded Rod – 1/2″ & 7/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£20.38GCT-002 Grab Clip for Threaded Rod – 3/8″ & 5/8″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£19.46GCT-001 Grab Clip for Threaded Rod – 1/4″ & 1/2″ Pipe
Grab clips are the quick and simple way to mount an asymmetric pair of refrigerant pipes onto M8 or M10 threaded rod. The spring clip fastener can be fitted onto the rod and adjusted in seconds. The black zinc coating matches typical insulation and provides good corrosion resistance.
£18.36Cantilever Arm 600mm Kit inc. Struts 750mm & M8 Fixings
Galvanised steel cantilever arm with 14mm diameter holes, for assemble and installation. Used for supporting condensing units on external walls. in a straight length and webbed version in a variety of lengths.
£35.00